Yokogawa YFGW410 - Manual (Page 76)

<D3. Constructing a Field Wireless System>
D3-15
IM 01W02D01-01EN
FD0313.ai
Figure D3-13 Hopping Pattern Setting Tab
At the bottom of the main window, select the wireless channels to be used to automatically gener-
ate a hopping pattern. At the top of the main window, configure the [Channels for advertisements]
setting.
Channels for advertisements are wireless channels to add the new wireless devices to the field
wireless network.
Generally, the default channels do not need to be changed.
n Channels for advertisements
Set the channels for advertising transmission. The default setting is [Use default channels
(14,16,19,22) for advertisements]. In most cases, use the default setting.
If it is necessary to change to other transmission channels, select [Use designated channels for
advertisements], and then select the channels in the drop-down boxes below. Before making
changes, consult our service or sales representative.
n Hopping Patterns
l Hopping Patterns per Subnet
Select how many Hopping Patterns are used in one field wireless subnet.
If many field wireless subnets are used and each subnet is a simple network, select 1. If a few
field wireless subnets are used and each subnet is a complex network, select 4.