Yokogawa YFGW410 - Manual (Page 108)

<D3. Constructing a Field Wireless System>
D3-47
IM 01W02D01-01EN
D3.2.7 Sampling Data
At this tab, configure the publication of process values and diagnosis data from field wireless
devices to host systems.
When [Sampling Data] is selected in the menu tree of the Configurator, the tab shown in Figure
D3-48 appears.
FD0348.ai
Figure D3-48 Sampling Data Tab
Information displayed in the sampling data list
Item Description
Default
setting
Sampling Data
The name of the data exchanged with the host system. List rows are
displayed in ascending order by data name.
Blank
Read/Write Identify the data as read or write data.
Period This is the publication period.
Stale Limit
This is the timeout interval when published data does not arrive normally.
It is set in multiples of the Period setting.
Retry
This is the retry mode when data does not arrive normally.
x1: Normal mode; x2: Double the normal mode band
Vender ID This is the vendor ID.
Model ID This is the model ID.
DEV_REV This is the device revision.
CFREV This is the capabilities file (CF) revision.
Functions of the buttons of the sampling data setting window
Button name Function
Add
Associate the CF file with registered field wireless devices, configure the sampling data
exchanged with the host system, and add the transmission parameters.
Edit Change the setting information of the registered sampling data.
Delete Delete sampling data.