Yokogawa YFGW410 - Manual (Page 126)

<D3. Constructing a Field Wireless System>
D3-65
IM 01W02D01-01EN
Data size of parameters that can be allocated
Parameter name Description
Data size (word)
Status of value Value
AO_xx(“BLOCK_DEXCRIPTION”).READBACK Output of analog data 1 2
BO_xx(“BLOCK_DEXCRIPTION”).
READBACK_B
Output of binary data 1 1
The methods to allocate and delete parameters, perform batch operations, and set filters are the
same as those for input registers. For details, see “Input Register Tab” in this sub-section.
D3.2.9 Resource
When [Resource] is selected in the menu tree of the Configurator, the tab shown in Figure D3-65
appears in the main window.
FD0372.ai
Figure D3-65 Resource Tab
The network ID of the field wireless network and the resource usage rate (%) of that field wireless
subnets are displayed in the resource tab. Devices can be added as long as the usage rate does
not exceed 100%.
After configuring new settings or changing settings of the Configurator, perform an error check of
the wireless network before selecting [Resource].
To perform an error check, click [Tools] and then click [Error Check]. When the check is complete,
the window shown in Figure D3-66 appears.