Yokogawa YFGW410 - Manual (Page 36)

<C3. Mounting>
C3-2
IM 01W02D01-01EN
C3.2 Mounting to DIN Rails
First, install the DIN rails on the panel or the cabinet wall. Secure the DIN rails by tightening the
appropriate number of screws. Be careful that the rails do not get bent or deformed due to the
weight of the YFGW410 or cable tension.
To securely ground YFGW410, insert an insulation bushing between the DIN rails and mounting
panel and tighten the screws. Insulate the DIN rails from the metal surface of the mounting panel.
Insulation bushing
DIN rail
Insulation bushing
FC0302.ai
Figure C3-2 Use of insulation bushing