Yokogawa YFGW410 - Manual (Page 160)

<D4. Starting up the Field Wireless System>
D4-23
IM 01W02D01-01EN
The following are the device status indications.
Mark Status Condition
Normal Normal status.
Fault
The device has a fault status.
If the fault status persists after the following checks, it is necessary to replace the device.
• Is the network cable correctly connected to the host system?
• Is power being supplied normally?
• If the above two items are normal, power off and on again to restart
The backbone router status list shows the following items.
Item Description
Device Tag Device tag name
Network ID Network ID
Vender/Model Vendor/model
Device Role Device role, BBR (constant)
Interface Type
Type of a communication interface
“Wired” if wired LAN (copper or optic fiber), and “Wireless” if wireless LAN
Join Status
Join status
Full Join / Now Connecting / Disconnected
WLAN1 SSID
Service Set Identifier for Wireless
LAN1
Appears for wireless LAN client model
RSSI 1
Received Signal Strength Indication for
Wireless LAN1 (dBm)
WLAN2 SSID
Service Set Indentifier for Wireless
LAN2
RSSI 2
Received Signal Strength Indication for
Wireless LAN2 (dBm)
Device Status Device status, Good/Bad
A round mark of a left side of each device tag shows a summary of the device status, and is syn-
chronized with [ACTIVE] LED of each device. YFGW510 updates its status every 10 minutes.
The following are the device overall status indications and appropriate responses.
Mark Status Condition
Normal Normal status.
Fault
The device has a fault status.
If the fault status persists after the following checks, it is necessary to replace the device.
• Is the network cable correctly connected to the backbone network ?
• Is the wireless LAN configuration or wireless LAN connection correct ?
• Is power being supplied normally?
• If the above two items are normal, power off and on again to restart
Joining The device is joining to the network. Wait until completing the join.
Opening the device properties and executing functions are available on the Backbone Device
List window. For details, see Sub-section D4.2.3 Graphic Viewer.