Yokogawa YFGW410 - Manual (Page 142)

<D4. Starting up the Field Wireless System>
D4-5
IM 01W02D01-01EN
The information is automatically refreshed every mintue.
Device details are only automatic refreshed for field wireless devices. For details of device detail
display, see Sub-section D4.2.3 Graphic Viewer.
IMPORTANT
Depending on the information refresh timing, status of devices and/or communications paths
may be an intermediate status. It does not indicate an operational or other problem. From the
next refresh the display will be complete.
The information on the right side of the tool bar shows the following information.
Line 1: Connected YFGW410 device tag. The connection status or operating mode of YFGW410
Line 2: YFGW410 time
Line 3: Refresh button and user name
Item Description
Connected YFGW410
device tag
Device tag of YFGW410.
In redundant operation, the device tag of the operating YFGW410 appears. In
UNIT1 YFGW410 case, the device tag has “-1” appended. In UNIT2 YFGW410
case, the device tag has “-2” appended.
The UNIT number is determined by the cable of redundancy.
Connection status or operat-
ing mode of YFGW410
When the Monitor is connected to YFGW410, <Online> appears, otherwise
<Offline> appears.
YFGW410 time
The time of the latest refresh appears. The time zone of this and time is set by
the Configurator. See Sub-section D3.2.11 Other Setting Operations.
User name Shows the logged in user name.