Yokogawa YFGW410 - Manual (Page 73)

<D3. Constructing a Field Wireless System>
D3-12
IM 01W02D01-01EN
When the [Edit] button is clicked, the information of the device selected in the access control list
is displayed in the window shown in Figure D3-8. Make the necessary changes or corrections.
Button name Operation
OK
If there are no errors in the information entered, the information in the access control list
is changed. If there is an input error, the location of the problem is indicated by an error
icon and the content of the error is displayed to correct the problem, as shown in Figure
D3-9.
Cancel
The registration information is not changed and the window returns to the tab displayed
in Figure D3-7.
When a setting to be deleted is selected in the access control list and the [Delete] button is
clicked, the dialog shown in Figure D3-10 appears.
FD0310.ai
Figure D3-10 Deletion Confirmation Dialog
Button name Operation
OK The registration selected in the access control list is deleted.
Cancel
The registration information is not changed and the window returns to the tab displayed
in Figure D3-7.
n Time Source
Setting the time source that YFGW410 uses. Time Source is the time standard to notify the host
system from the Field Wireless Management Console and YFGW410.
To synchronize the time of the YFGW410 and host system, acquire the time from a network time
protocol (NTP) server that the host system uses. By synchronizing the time with the host system,
you can handle data with time stamps.
Even if an NTP server is not used, the Field Wireless Network operates normally based on the
time maintained by the YFGW410.
When [Time Source] is selected in the menu tree of the Configurator, the tab shown in Figure D3-
11 appears in the main window.