Yokogawa YFGW410 - Manual (Page 72)

<D3. Constructing a Field Wireless System>
D3-11
IM 01W02D01-01EN
When the [Add] button is clicked, the window shown in Figure D3-8 appears.
FD0308.ai
Figure D3-8 Access Control List Registration Window
Two settings are available for the access control list setting: [IP Address] to configure the IP ad-
dress, and [Network] to configure an individual network. In the window, select the button of the
desired setting. The default setting is [IP Address].
When [IP Address] is selected, enter the IP address in the [IP Address] field.
When [Network] is selected, enter the network address in the [Network Address] field and enter
the subnet mask in the [Subnet Mask] field.
The default setting for all items is [0.0.0.0].
Button name Operation
OK
When there are no errors in the entered information, it is added to the access list in the
window shown in Figure D3-7. If there is an input error, the location of the problem is
indicated by an error icon and the content of the error is displayed to correct the problem.
See Figure D3-9.
Cancel
No registration information is added and the window returns to the tab displayed in
Figure D3-7.
FD0309.ai
Figure D3-9 Error Display Window