Yokogawa YFGW410 - Manual (Page 151)

<D4. Starting up the Field Wireless System>
D4-14
IM 01W02D01-01EN
l Other functions
In addition to displaying the properties of the devices, by right-clicking a device icon usual func-
tions for regular management and maintenance can be executed: showing an information of
neighbor devices, restarting a device and reading out of the device parameters.
These functions can be called either from the Topology Viewer, the Backbone Device List or the
Field Device List.
The functions that can be used depend on the device type as follows.
Function Summary
Field wireless
device
Backbone devices
YFGW510 YFGW410
Device Properties
Display device detail informa-
tion
  
Candidate Neighbors Display neighbor devices  
Restart Device Restart device   
Read Object Attribute Read out device parameters 
Change Active/ Standby
Status
Display device active/stanby
status and switch the status

This sub-section describes the procedure of executing functions from the Graphic Viewer as an
example.
Opening the pop-up menu by right-clicking a device icon as shown in Figure D4-10.
FD0410.ai
Figure D4-10 Function Selection Pop-up Menu (e.g., field wireless device)
Select a function in the pop-up menu to start it. The pop-up menu closes when the window is
refreshed (every minute).