Yokogawa YFGW410 - Manual (Page 117)

<D3. Constructing a Field Wireless System>
D3-56
IM 01W02D01-01EN
IMPORTANT
For periodic data publication, set an update time in the range that can be used by the field wire-
less device.
The composition of the [Write Parameters] tab is the same as that of the [Read Parameters] tab,
excluding the items below.
Content of the Available Parameters tree
First level: UAP ID
Second level: Object Name + Block Description
Third level: Attribute Name
The example for this model shows that 1 binary output (BO) (process value output) can be pub-
lished.
Content of the Read Parameters tree
First level: UAP ID
Second level: Dispersion
OID
Third level: For details,
see the Read
Parameters
section
Fourth level: Parameter
When field wireless devices have no read parameters, “No Dispersion Object exist” is displayed
under the UAP ID at the [Write Parameters] tab.
When the [OK] button is clicked after completing the sampling data settings, the information is
added to the tab shown in Figure D3-58.
When the [Cancel] button is clicked, the information is discarded and nothing is added to the list.
FD0360.ai
FD0361.ai