Yokogawa YFGW410 - Manual (Page 97)

<D3. Constructing a Field Wireless System>
D3-36
IM 01W02D01-01EN
 Editing area information
When the row of information to be updated is double clicked or the row is selected in the list and
the [Edit] button is clicked, the shown in Figure D3-34 appears. Make the necessary corrections
or revisions.
When the [OK] button is clicked, the changes are reflected in the registration list. When the [Can-
cel] button is clicked, the changes are discarded.
 Deleting area information
When the row of information to be deleted is selected in the graphic registration list and the [De-
lete] button is clicked, all information of the relevant area is deleted.
n Area settings (Area001(2005))
When graphics are registered with the list shown in the Figure D3-33, the specified area name
is displayed in the menu tree under [Graphic Editor]. The name is displayed using the following
format: “Area name (Network ID)”.
When an area name (in this example, Area001(2005)) in the menu tree is clicked, the tab shown
in Figure D3-35 appears.
FD0335.ai
Figure D3-35 Registered Area Setting Window
The picture of the map or floor plan registered in the area settings window is displayed on a main
window.
On this window, allocate YFGW510 and field wireless devices to their positions in the installation
plan.