Yokogawa YFGW410 - Manual (Page 152)

<D4. Starting up the Field Wireless System>
D4-15
IM 01W02D01-01EN
 Displaying device properties
Select [Device Properties] in the pop-up menu to open the window.
For detail information, see “Device Properties” in this sub-section.
 Displaying candidate neighbors
This function displays devices located in the vicinity which are not being used as primary or sec-
ondary path devices, but which are path candidate devices for which the received signal strength
indication is at least at a usable level.
Select [Candidate Neighbors] in the pop-up menu to open the window shown in Figure D4-11.
FD0411.ai
Figure D4-11 Candidate Neighbors Window
The [Device Tag] field of upper part of this window indicates the device tag of the device initiating
this function.
The items in the Available Candidate table are as follows.
Item Description
Neighbor Device tag of candidate device
Vender/Model Device vendor/model
Device Role Device role
RSSI Received Signal Strength Indication (dBm)
RSQI Received Signal Quality Indication