Yokogawa EJX530B - Manual (Page 77)

<10. Parameter Summary>
10-2
IM 01C27F01-01EN
Object
ID
Attribute
ID
Label Description
Default
value
Handling
1.
UAPMO
block
(continued)
104 Reset Energy Left Initialize the remaining battery life (Energy Left) and
reset it as new batteries.
Perform the battery replacement.
0 = Continue (Cancel)
1 = Reset (Initialization)
0 (reading value
is always 0)
W
105 Power Supply
Status
Indicates the predicted battery level and the power
supply method.
0 = external power supply
1 = battery level 75% or more
2 = battery level 25% ~ 75%
3 = battery level 25% or less
R
106 EHType *2 Available to write note into this parameter. --- W
107 Power Supply
Voltage *2
Indicates the measured power supply voltage (V). --- R
110 Hardware Write
Protect
Allows recognizing the status of the hardware write
protection switch.
(Switch Off, Switch On)
R
111 Radio Silence Repeats a cycle of a 1-hour pause and 6-minute
search if the instrument cannot join the network after a
time specified in Radio Silence has elapsed.
When 0 is set, the Radio Silence is invalid.
28800 W
112 Simulation Active
Alert *2
The On/Off or priority for Simulation Active Alert can
be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
1. TRUE
2. 15
W
113 Soft Update
incomplete Alert *2
The On/Off or priority for Soft Update incomplete Alert
can be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
Not available for EJX.
1. TRUE
2. 15
W
114 Power low Alert *2 The On/Off or priority for Power low Alert can be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
1. TRUE
2. 15
W
115 Power Critical low
Alert *2
The On/Off or priority for Power Critical low Alert can
be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
1. TRUE
2. 15
W
116 Fault prediction
Alert *2
The On/Off or priority for Fault prediction Alert can be
set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
Not available for EJX.
1. TRUE
2. 15
W
117 Environmental
conditions Alert *2
The On/Off or priority for Environmental conditions
Alert can be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
1. TRUE
2. 15
W
118 Outside sensor
limits Alert *2
The On/Off or priority for Outside sensor limits Alert
can be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
1. TRUE
2. 15
W
119 Out of service
Alert *2
The On/Off or priority for Out of service Alert can be
set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
1. TRUE
2. 15
W