2 model and suffix codes, Model and suffix codes -3 – Yokogawa EJX530B User Manual

Page 88

Advertising
background image

<11. General Specifications>

11-3

IM 01C27F01-01EN

11.2 Model and Suffix Codes

Model

Suffix Codes

Description

EJX510B

EJX530B

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . .

Absolute pressure transmitter

Gauge pressure transmitter

Output

signal

-L . . . . . . . . . . . . . . . . . . . .

Wireless communication (ISA100.11a protocol)

Measurement

span (capsule)

A. . . . . . . . . . . . . . . . . . .

B. . . . . . . . . . . . . . . . . . .

C. . . . . . . . . . . . . . . . . . .

D. . . . . . . . . . . . . . . . . . .

8 to 200 kPa (1.16 to 29 psi)

0.04 to 2 MPa (5.8 to 290 psi)

0.2 to 10 MPa (29 to 1450 psi)

1 to 50 MPa (145 to 7200 psi)

Wetted parts

material *

3

S. . . . . . . . . . . . . . . . . .

H. . . . . . . . . . . . . . . . . .

Process connection

Diaphragm

Others

316L SST

#

Hastelloy C-276

*1#

316L SST

#

Hastelloy C-276

*1#

Hastelloy C-276

*1#

Hastelloy C-276

*1#

Process

connections

4 . . . . . . . . . . . . . . . .

7 . . . . . . . . . . . . . . . .

8 . . . . . . . . . . . . . . . .

9 . . . . . . . . . . . . . . . .

1/2 NPT female

1/2 NPT male

G1/2 male

*2

M20×1.5 male

*2

N. . . . . . . . . . . . . .

Always N

-0 . . . . . . . . . . .

Always 0

Amplifier housing

7 . . . . . . . . . .

8 . . . . . . . . . .

9 . . . . . . . . . .

Cast aluminum alloy with integral antenna

Cast aluminum alloy with detachable antenna (2 dBi)

*5

Cast aluminum alloy without antenna (N connector)

*4*5

Electrical connection

J . . . . . . . . . No electrical connection, battery-powered type (battery case only; battery

cells not included)

Integral indicator

D. . . . . . .

Digital indicator

Mounting bracket

F . . . . .

N. . . . .

304 SST 2-inch pipe mounting

None

Optional Codes

/  Optional specification

The “►” marks indicates the most typical selection for each specification. Example: EJX530B-LAS4N-07JNN/o.

*1:

Hastelloy C-276 or ASTM N10276.

*2:

Not applicable for combination of capsule code

D and wetted parts material code H.

*3: Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of

inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant

facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid

can contaminate the user’s process fluids.

Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite,

and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.

*4:

Order the antenna separately from accessary option.

*5: Remote antenna cables can be attached. Order separately from accessary option.

The ‘#’ marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use

of 316 SST material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for

details.

Advertising
This manual is related to the following products: