Triton FT7000XP User Manual - Manual (Page 129)

119
M
ANAGEMENT
F
UNCTIONS
G
ENERAL
P
ARAMETERS
A
CCESS
I
NSTRUCTIONS
:
1. From the M
AIN
M
ENU
screen, select the T
ERMINAL
C
ONFIGURATION
option by pressing number <6> on
the keypad.
2. From the T
ERMINAL
C
ONFIGURATION
screen, select the G
ENERAL
P
ARAMETERS
option by pressing num-
ber <1> on the keypad.
D
ESCRIPTION
:
The G
ENERAL
P
ARAMETERS
option allows the terminal operator to perform the following functions:
1. T
ERMINAL
N
UMBER
. This function enables you to edit the terminal number. It is a unique string of
sixteen (16) numbers (usually provided by the host network or bank). The terminal ID will be sent to the
host when specified. Press <1> on the keypad to enter/edit the ID number.
2. S
END
C
ABINET
A
LARM
S
TATUS
(Default: Disabled). This function allows you to enable/disable the send
cabinet alarm status. Press <2> on the keypad to either enable (check) or disable (uncheck). When
enabled, menu option (3) - ‘Send Cabinet Alarm Status Code’ will automatically be enabled.
3. S
ELECT
C
ABINET
A
LARM
S
TATUS
C
ODE
(Default: Grayed out). When enabled, allows user to select
status code ‘204’ or ‘208’ that is sent to the host network or bank. Press <3> on the keypad to choose
status code.
4. S
END
S
AFE
D
OOR
A
LARM
S
TATUS
. This function allows you to enable/disable the send safe door alarm
status. Press <4> on the keypad to either enable (check) or disable (uncheck).
5. E
NTER
/E
XIT
M
AINTENANCE
S
TATUS
O
PTIONS
. The available status options are described below. Press
<5> on the keypad to toggle through the options.