Triton FT7000XP User Manual - Manual (Page 45)

35
G
ENERAL
M
AINTENANCE
NOTE: The following steps reference Figure 4-13 and 4-14.
Steps 1 through 9 reference Figure 4-14:
1. Lift the Bail (item 3) and remove any paper that may be inside the printer. Close the Bail.
2. Place the paper roll (item 4) in the Paper Handler (item 5). The paper roll must have a roll pin through its
center.
*** Warning ***
Remove power from the terminal during any servicing that requires the
user to insert fingers into the printer wheel area.
R
EPLENISHING
P
APER
(J
OURNAL
P
RINTER
)
Figure 4-13. Journal printer.
Cut / Feed
switch
Bail slot
Bail
Paper “out’
sensor