Triton FT7000XP User Manual - Manual (Page 31)

21
R
EPLENISHING
C
ASSETTES
2. Flip the lid back fully. Hold the green knob and pull the pressure plate to the rear (toward the handle).
Release the knob and ensure the plate is caught.
L
OADING
/ I
NSTALLING
N
OTE
C
ASSETTE
:
1. Remove any rejected notes from the reject area. Note: Only the TOP cassette accepts rejects.
!
Before loading the cassette with currency:
The shape of some notes may be affected by conditions of storage or bundling, preventing them from
forming neat even piles. If not corrected, such conditions may cause notes to be rejected by the
dispensing mechanism. To compensate for the most common conditions of slanting or cupped note
piles, follow the directions given here. Notes with no apparent shape problems are referred to as
“common” notes.
• Slanting pile
To avoid dispensing problems caused by a “slanting” pile, put the notes in neat bundles of no more than ½
to ¾ inches in thickness. Turn every other bundle around to minimize slanting of the pile.
Figure 3-7. Move pressure plate to rear. Figure 3-8. Plate latched to rear.
• Cupped bundle
To avoid dispensing problems caused by cupped bundles, turn all the bundles with the cupped side
towards the dispense opening.
• Common notes
Place the prepared bundles in the cassette.