Triton FT7000XP User Manual - Manual (Page 153)

143
M
ANAGEMENT
F
UNCTIONS
D ESCRIPTION :
The C
ONFIGURE
R
ECEIPT
P
RINT
F
ORM
option allows the terminal operator to set the form/receipt dimensions
(settings are based on 1/10 inch).
Example: 30 = 3 inches; 26 = 2.6 inches
The maximum media height and width values are not programmable and are determined based on the actual
dimensions of the paper installed.
The range of settings allowed for height, width, vertical, and horizontal offset will be based on the maximum
settings.
The vertical offset is the space from the top margin before printing begins. The horizontal offset is the space
from the left margin before printing begins.
C
ONFIGURE
R
ECEIPT
P
RINT
F
ORM
C
ONFIGURE
C
OUPON
P
RINT
F
ORM
A
CCESS
I
NSTRUCTIONS
:
1. From the M
AIN
M
ENU
screen, select the T
ERMINAL
C
ONFIGURATION
option by pressing number <6> on
the keypad.
2. From the T
ERMINAL
C
ONFIGURATION
screen, select the P
RINTER
S
ETUP
option by pressing number <7>
on the keypad.
3. To C
ONFIGURE
R
ECEIPT
P
RINT
F
ORM
, press number <2> on the keypad.
4. To C
ONFIGURE
C
OUPON
P
RINT
F
ORM
, press number <3> on the keypad. Note: This option currently not
available.