Triton FT7000XP User Manual - Manual (Page 74)

64
M
ODEL
FT7000 XP U
SER
M
ANUAL
F
ORCE
U
NLOCK
Cassette
A
CCESS
I
NSTRUCTIONS
:
1. From the D
IAGNOSTICS
screen, select the C
ASH
D
ISPENSER
option by pressing number <1> on the
keypad.
2. From the C
ASH
D
ISPENSER
screen, select the F
ORCE
U
NLOCK
C
ASSETTE
option by pressing number <4>
on the keypad. Note: This option currently not available.
D
ESCRIPTION
:
The F
ORCE
U
NLOCK
C
ASSETTE
function provides a means of overriding the NMD-100’s unlocking mechanism
associated with a specific cassette. It is only to be used immediately after failure of a normal cassette unlock
operation.
Occasionally, a condition may occur that prevents a cassette from being removed from the dispensing mecha-
nism. For example, a note that is lodged or jammed in a cassettes’s ‘gate’ could cause such a condition. The
gate is a mechanical shutter on the feed end of a cassette which lowers to allow notes to be dispensed and
raises as a security precaution when the cassette is removed.
During a normal unlocking operation when the gate is closed, the cassette releases an associated mechanical
latch allowing the cassette to be removed from the body of the dispenser. If the gate does not fully close, the
cassette will not release the latch and remains locked in the mechanism.
If you find that a particular cassette can not be removed after performing a normal unlock operation, use this
function first to attempt releasing the applicable cassette from the mechanism.
Once the cassette has been removed from the dispenser, carefully remove any notes that are sticking out of
cassette. Insert the cassette into the dispenser and perform a normal ‘Lock’ operation followed by a normal
‘Unlock’ operation. You may now remove the cassette.