Triton FT7000XP User Manual - Manual (Page 176)

166
M
ODEL
FT7000 XP U
SER
M
ANUAL
S
AVE
P
ARAMETERS TO
E
XTERNAL
S
TORAGE
A
CCESS
I
NSTRUCTIONS
:
1. From the M
AIN
M
ENU
screen, select the T
ERMINAL
S
TATUS
option by pressing number <8> on the
keypad.
2. From the T
ERMINAL
S
TATUS
screen, select the S
AVE
P
ARAMETERS TO
E
XTERNAL
S
TORAGE
by pressing
number <2> on the keypad.
D
ESCRIPTION
:
The S
AVE
P
ARAMETERS TO
E
XTERNAL
S
TORAGE
allows user to save the current terminal parameters to an
external storage device that is attached to an available USB port on the computer. Should it become necessary
to restore the parameters, the “Restore Parameters from External Storage” function can be used to quickly
configure the terminal with saved parameters.
This procedure requires you to attach an external storage device such as a pin drive to one of the USB ports
on the computer. To save parameters to the device:
! Open the cabinet sleeve door. Locate one of the USB port connectors. Install the external device into
an available USB port connector.
!
Press <3> on the keypad. At the confirmation dialog, select <Enter> to save the terminal parameters to
the device.