Triton FT7000XP User Manual - Manual (Page 37)

27
R
EPLENISHING
C
ASSETTES
O
PENING THE
R
EJECT
C
ASSETTE
:
1. Insert the key into the cassette lock. To unlock the cassette, apply inward pressure on the key while
turning it clockwise to the stop position (approximately a quarter-turn). Open the cassette by simulta-
neously pressing the release button and lifting the lid. Flip the lid back fully (Figures 3-24 and 3-25).
Figure 3-24. Key inserted. Figure 3-25. Opening lid.
2. The reject cassette is now open for collecting any rejected bundle notes. These will be present in the
folding tray. After retrieving any rejected bundle notes, lift the folding tray and check underneath for
any rejected single notes (Figures 3-26 and 3-27).
3. After removing any rejected notes, close the lid. Fold the lid down to its locked position. The release
button should “pop” out, allowing the lid to mate cleanly with the body of the cassette. Turn the key
counterclockwise to lock the cassette.
Figure 3-26. Bundle reject tray. Figure 3-27. Single reject compartment.
I
NSTALLING THE
R
EJECT
C
ASSETTE
:
Using the reverse of the steps taken to remove the reject cassette, slide the cassette back into its slot in the
mechanism. Make sure the cassette is fully inserted. Following the Replenish Cassette(s) function prompts,
<Lock> all cassettes.