Triton FT7000XP User Manual - Manual (Page 48)

38
M
ODEL
FT7000 XP U
SER
M
ANUAL
2. Before inserting the new ink cartridge, turn the cartridge knob “counterclockwise” until ribbon is taut
(Figure 4-17).
3. Open the Bail. Carefully mount the ink cartridge onto the drive shaft, keeping the ribbon between the
Platen and the Printhead (Figure 4-18).
Figure 4-17. Turn knob counterclockwise.
Ribbon
Bail
(Open position)
Ink cartridge
Guide slot
Platen
Printhead
Cartridge knob
4. Thread the ribbon through the Guide slot and, before closing the Bail, make sure the ribbon is still taut
by turning the cartridge knob counterclockwise (Figure 4-18).
5. Close the Bail. The ink cartridge is now loaded.
Figure 4-18. Ink cartridge installed.
Knob