KYORITSU 6300 Instruction Manual User Manual
Model 6300
Advertising
Table of contents
Document Outline
- Contents
- Unpacking Procedure
- Safety warnings
- 1. Instrument overview
- 2. Instrument layout
- 3. Preparation for measurement
- 4. Setting
- 4-1 List of setting items
- 4-2 Classification of setting items
- 4-3 Setting procedure of each setting item
- 4-3-1 “Setting 01” Wiring
- 4-3-2 “Setting 02” Voltage range
- 4-3-3 “Setting 03” Current range
- 4-3-4 “Setting 04” Clamp sensor
- 4-3-5 “Setting 05” VT ratio
- 4-3-6 “Setting 06” CT ratio
- 4-3-7 “Setting 07” Time
- 4-3-8 “Setting 08” Buzzer
- 4-3-9 “Setting 09” Integration interval
- 4-3-10 “Setting 10” Integration start time and date
- 4-3-11 “Setting 11” Integration stop time and date
- 4-3-12 “Setting 12” Reset of integration value
- 4-3-13 “Setting 13” Demand interval
- 4-3-14 “Setting 14 Demand start time and date
- 4-3-15 “Setting 15” Demand stop time and date
- 4-3-16 “Setting 16” Demand target value
- 4-3-17 “Setting 17” Demand inspection cycle
- 4-3-18 “Setting 18” Reset of demand value
- 4-3-19 “Setting 19” Use of CF card
- 4-3-20 “Setting 20” Formatting CF card
- 4-3-21 “Setting 21” Deleting the data in CF card
- 4-3-22 “Setting 22” Deleting the data in internal memory
- 4-3-23 “Setting 23” System reset
- 4-3-24 “Setting 24” Loading settings
- 4-3-25 “Setting 25” Saving settings
- 5. Wiring configurations
- 6. Instantaneous value measurement
- 7. Integration value measurement
- 8. Demand value measurement
- 9. CF card/ Internal memory
- 10. Communication function/ Interface software
- 11. Other functions
- 12. Troubleshooting
- 13. Specification