Opening a project, Adding a communication driver to the host pc, Adding a device dtm to the communication dtm – Badger Meter SRD/SRI Valve Positioners User Manual
Page 13
Advertising
OPENING A PROJECT
Adding a Communication Driver to the HOST PC
1 . Start PACTware .
2 . From the Project menu, select HOST PC .
3 . Right-click and select Add device .
4 . From the Device for window, select HART Communication .
5 . Click OK .
Adding a Device DTM to the Communication DTM
1 . From the Project menu, select the HART Communication driver you
just added under HOST PC .
2 . Right-click and select Add device .
Opening a Project
Page 13
August 2014
POS-UM-00011-EN-02
Advertising