Badger Meter SRD/SRI Valve Positioners - Manual (Page 77)

ADDITIONAL FUNCTIONS
Management
Go Offline
This action will set the positioner offline .
Go Online
This action will set the positioner online .
Go Local
This action will allow the positioner to be operated in the local mode .
Reset Counters
The Cycle Count and Travel Sum parameters will be reset by this
procedure .
The device will be taken off-line for a short period, which may cause a
process upset .
Press Continue to reset the counters, or Cancel to abort .
Reset Status
All status fields are intended to be reset . This includes the diagnostics,
the primary and secondary status, and the additional status . Naturally,
if the underlying problem has not been cured, then the failure bit(s) will
be reasserted almost immediately .
Additional Functions
Page 77 August 2014 POS-UM-00011-EN-02