Badger Meter SRD/SRI Valve Positioners - Manual (Page 82)

Calibrate Air Supply
To perform the calibration function, press Continue and
follow the instructions displayed in each window or under
“Calibration Menu” on page 62 .
Calibrate Output Pressure 1 / 2
To perform the calibration function, press Continue and
follow the instructions displayed in each window or under
“Calibration Menu” on page 62 .
Calibrate Position Feedback
Analog Output 4…20 mA, galvanically separated, two-wire system . The signal is derived from the valve position .
The Position Feedback Calibration is designed to calibrate the 4…20 mA Output .
Audit Trail
The Audit Trail is designed to record all events from a positioner, listed by date and time . This event monitoring can be used to
put a positioner under a special surveillance if there are uncertainties regarding the operation .
The event monitoring can be freely defined .
1 . Depending on what should be monitored,
check the boxes for:
• Device Parameter
• Process Value
• Device Status
• Function Event
2 . To send this data to a log file,
select Save to file .
Endpoints
See “Startup” on page 27 .
Autostart
See “Startup” on page 27 .
Additional Functions
Page 82 August 2014 POS-UM-00011-EN-02