NORD Drivesystems BU0510 - Manual (Page 4)

POSICON position control for NORD frequency inverters, SK 530E and above About this document
4 Subject to technical alterations BU 0510 GB-3911
Intended use of the frequency inverter
The compliance with the operating instructions is necessary for fault-free operation and
the acceptance of possible warranty claims. These operating instructions must be read
before working with the device!
These operating instructions contain important information about servicing. They must
therefore be kept close to the device.
SK 500E series frequency inverters are devices for industrial and commercial systems used
for the operation of three-phase asynchronous motors with squirrel-cage rotors and
Permanent Magnet Synchronous Motors - PMSM (SK 54xE and above). These motors must
be suitable for operation with frequency inverters. Other loads must not be connected to the
devices.
Series SK 500E frequency inverters are devices for stationary installation in control
cabinets. All details regarding technical data and permissible conditions at the
installation site must be complied with.
Commissioning (implementation of the intended use) is not permitted until it has been
ensured that the machine complies with the EMC directive 204/108/EEC and that the
conformity of the end product meets the machine directive 2006/42/EEC (note EN 60204).

Getriebebau NORD GmbH & Co. KG, 2011