NORD Drivesystems BU0510 - Manual (Page 59)

4 Parameter settings
BU 0510 GB-3911 Subject to technical alterations 59
Parameter Setting value / Description / Note Device Supervisor Parameter set
P748 [-01]
...
[-03]
Status CANopen
(CANopen status)
SK 520E or
higher
S
0000 ... FFFF (hex) [-01] = CANbus/CANopen Status [-02] = reserved [-03] = reserved
Bit 0 = 24V bus voltage supply
Bit 1 = CANbus in "Bus Warning" status
Bit 2 = CANbus in "Bus Off" status
Bit 3 ... 5 = vacant
Bit 6 = Protocol of CAN module is
0 CAN or 1 CANopen
Bit 7 = vacant
Bit 8 = "Bootsup Message" sent
Bit 9 = CANopen NMT status
Bit 10 = CANopen NMT status
Bit 11 = vacant
Bit 12 ... 14 = reserved
Bit 15 = vacant
CANopen NMT State Bit 10 Bit 9
Stopped =
Pre-Operational =
Operational =
0
0
1 0
1
0