Sterlco SDAP 90-225 CFM Series Drying and Conveying Systems - Manual (Page 3)

SDAP Series PD 2 to PD 4 Drying and Conveying Systems Page 3
Safety Considerations
Sterling SDAP Series drying and conveying systems are designed to provide safe and reliable
operation when installed and operated within design specifications, following national and local
safety codes.
To avoid possible personnel injury or equipment damage when installing, operating, or
maintaining this equipment, use good judgment and follow these safe practices:
; Follow all SAFETY CODES.
; Wear SAFETY GLASSES and WORK GLOVES.
; Disconnect and/or lock out power before servicing or maintaining the dryer.
; Use care when LOADING, UNLOADING, RIGGING, or MOVING this equipment.
; Operate this equipment within design specifications.
; OPEN, TAG, and LOCK ALL DISCONNECTS before working on this equipment. It is a
good idea to remove the fuses and carry them with you
; Make sure the dryer and components are properly GROUNDED before switching on power.
; Do not jump or bypass any electrical safety control.
; Do not restore power until all tools, test equipment, etc. have been removed and the dryer
and conveying equipment are fully reassembled.
; Only PROPERLY TRAINED personnel familiar with the information within this manual
should work on this equipment.