Sterlco SDAP 90-225 CFM Series Drying and Conveying Systems - Manual (Page 4)

Page 4 SDAP Series PD 2 to PD 4 Drying and Conveying Systems
Table of Contents
1
General Information ................................................. 7
1-1 Models Covered
1-2 Equipment Function
1-3 Necessary Documents
1-4 Standard Features
1-5 Options
1-6
The Closed Loop Drying System
1-7 What is Desiccant?
1-8 The Process/Regeneration Cycle
1-9 Closed Loop Machine Conveying
1-10 Specifying a Drying/Conveying System
2
Shipping Information.............................................. 13
2-1 Unpacking and Inspection
2-2 In the Event of Shipping Damages
2-3 If the Shipment is Not Complete
2-4 If the Shipment is Not Correct
2-5 Returns
3
Mechanical Installation .......................................... 15
3-1 Work Rules
3-2 Positioning Your SDAP System
3-3 Drying Hopper
3-4 Installing the Sight Glass Loader
3-5 Flange Mounting Tips
3-6 Installing Material/Vacuum Tubing
3-7 Adjusting the Machine Loader Closed Loop Dry Air Take-Off
Compartment
3-8 Adjusting Sight Glass Proximity Sensor Sensitivity
3-9 Drying Hopper Loader
3-10 Installing the Pickup Probe for Hopper Loaders
3-11 Connecting Cooling Water to the Optional Aftercooler
3-12 Connecting Compressed Air
3-13 Making Electrical Connections
3-14 Checking for Proper Blower Rotation