Sterlco SDAP 90-225 CFM Series Drying and Conveying Systems - Manual (Page 8)

Page 8 SDAP Series PD 2 to PD 4 Drying and Conveying Systems
1-3 Necessary Documents
The documents listed below are necessary for the operation, installation, and maintenance of
Sterling SDAP carts. You can obtain additional copies from Sterling, Inc. Make sure that the
appropriate personnel are familiar with these documents:
; This manual.
; The schematic and assembly drawings included in the customer information packet.
; The Customer Parts List included in the information packet.
; Operation and installation manuals for any optional controls or auxiliary equipment in the
drying system.
1-4 Standard Features
; Rugged compact cart with handle and sturdy 4” (10 cm) casters.
; Dual blower dryer with dual desiccant beds and 4-way compressed air operated valves.
; Up to 400ºF (204ºC) drying temperature range.
; Insulated drying hopper with sight glass.
; Cartridge type (two stage) air filters for all blowers.
; Integral Control Center for dryer and loading options.
; Electrical disconnect with all wiring to a common terminal point.
; PLC microprocessor control of the drying and conveying stations.
; Digital Dew Point monitor indicates dryer efficiency.
; Sequence shutdown of the dryer.
Level A – Machine Loader Only
; Sight glass loader with high efficiency centrifugal blower and adjustable convey timer.
; Cartridge type (two stage) air filters for the blower.
; Quick disconnect cable for sight glass loader material demand switch.
; Two (2) ten (10) -foot (3 m) lengths of vinyl flex hose and clamps.
; Closed loop dry air convey take-off compartment on discharge of drying hopper.