Day override, Canceling the settings – Sterlco SDAP 90-225 CFM Series Drying and Conveying Systems User Manual
Page 47
SDAP Series PD 2 to PD 4 Drying and Conveying Systems
Page 47
Day Override
If a holiday occurs during the weekly operation, the off time for Sunday can be executed for the
holidays. The override will execute for one week only, then the timer will automatically go back
to the previous program.
1. Hold the
COPY
key (#9) for one (1) second or longer. Make sure that the mode selector
switch is in
RUN
mode.
2. Select the day(s) you want with the
SHIFT
(#1) and
SET
keys (#2). If a previous
override had been set, this will show up when you first hold the
COPY
key. To clear a
previous override, press the
CLR
key (#10).
3. Press the
WRITE
key (#6).
4. Select Sunday (or another shutdown day) with the
SHIFT
(#1) and
SET
keys (#2).
5. Press the
WRITE
key (#6).
Canceling the Settings
All the operations can be cancelled.
1. Set
MODE
selector switch (#11) to
P1
.
2. Press the
CLR
key (#10).
Note: The 7-day timer cycle and pulse output are not used for dryer applications.