HP StorageWorks 2.32 Edge Switch - Manual (Page 90)

Monitoring SAN products 90
Figure 54 Master log
The following columns are in the master log:
• Source—The product on which the event occurred.
• Type—The type of event that was performed (for example, client/server communication events).
• Description—Description of the event.
• Time—The time and date the event occurred.
• IP—The IP address of the product on which the event occurred.
• Node Name—The name of the node on which the event occurred.
• Port Name—The name of the port on which the event occurred.
Viewing other logs
If you want to view certain types of events, but not the entire event log, you can open a specific
log. To view more than one log, you must open a separate window for each.
1. Select Monitor > Logs on the HAFM menu bar.
The View Logs dialog box appears (
Figure 55 ).
Figure 55 View Logs dialog box
2. Select the log that you want to view.
3. To view multiple logs simultaneously, select the Display in a new window check box and
then select an additional log.
• To clear the selected log, click Clear.
• To refresh the selected log, click Refresh.
4. Click OK.