HP XP Continuous Access Software User Manual
Page 110
5.
In the Free Volumes list of the Edit JNL Volumes pane (
), select the volumes
you want to register.
In the Free Volumes list, one row represents one volume. If you cannot find the volumes you
want to register, do any of the following:
•
Select PG, enter a parity group number in the text boxes to the right, and click Show. The
list displays volumes in the specified parity group. Select the volumes you want to register.
•
To register external LUs, select PG(Ext.), enter a parity group number in the text boxes to
the right, and click Show. The list displays volumes in the specified parity group. Select
the volumes you want to register.
NOTE:
Parity group numbers for external LUs start with E, but you do not need to enter
E in the text boxes. For example, to specify the parity group number E1-2, you only need
to enter 1 and 2 in the text boxes.
•
Select CU, and select a CU number from the list to the right. The list displays volumes in
the specified CU. Select the volumes you want to register.
NOTE:
In the current version, the Free Volume list only displays OPEN-V volumes.
6.
Click Add. The JNL Volumes list displays the volumes you want to register. The Operation
column of the list displays Add.
NOTE:
One journal group can contain only volumes belonging to the same CLPR.
7.
Click Set to close the Edit JNL Volumes pane.
8.
In the Preset list, check the settings you made.
•
To add volumes to register, right-click a volume in the Preset list, and select Modify. A
pane appears where you can add volumes.
•
To cancel registering a volume, right-click the volume, and select Cancel.
•
If necessary, repeat steps Step 3 through Step 8 to add volumes to other journal groups.
110
Using journal groups