HP XP Continuous Access Software - Manual (Page 127)

5. Select and right-click the mirrors from which you want to delete data volumes.
6. Select JNL Groups and Pairsplit-S.
7. In the Preset list, check the settings you made.
•
To cancel a setting, right-click the setting, and select Cancel.
•
If necessary, repeat step 3 through step 7 to specify other mirrors.
NOTE: The Range column indicates the unit used for splitting the mirror, and always displays
Group. The Mode column indicates how data volumes are deleted.
8. Click Apply to delete data volumes from the mirrors.
NOTE: If an error occurs, the right-most column of the Preset list displays the error code. To
view detailed information about the error, right-click the error code, and select Error Detail.
An error message appears providing detailed information about the error.
Deleting data volumes from mirrors (Pairsplit-S: ending copy operations) 127