HP XP Continuous Access Software - Manual (Page 169)

Table 32 Executing pairdisplay command using a shell script created with SSH Client (for SSH
proto. ver. 2)
$ ssh -2 [email protected] sudo pairdisplay -gg VG01
NOTE: Create a shell script on the OS the system administrator uses. For more information
about creating shell scripts, see the appropriate documentation for that OS.
•
Special file names given from standard input to the XP RAID Manager command
When giving special file names from standard input to the raidscan , inqraid , or mkconf .sh
commands, specify cat/home/nasroot/horc_devfile instead of ls/dev/sd* .
Table 33 Executing the inqraid command using the sudo command
$ cat /home/nasroot/horc_devfile | sudo inqraid -CLI
Table 34 Exec. the inqraid cmd. with shell script created in SSH client (for SSH format ver.2)
$ ssh -2 [email protected] "cat /home/nasroot/horc_devfile | sudo inqraid
-CLI"
•
Notes for scanning the NAS package's port by the raidscan command
Information on /dev/sda-sdi equivalent to the NAS system LU (NAS OS LU and dump LU)
can be displayed when scanning the NAS package's port using the raidscan command.
You should not define this information in HORCM_DEV in the configuration file because you
cannot use the NAS system LU (NAS OS LU and dump LU) as P-VOLs and S-VOLs.
Scope related to NAS Backup Restore features
•
XP Business Copy operations set by the Snapshot feature in NAS Backup Restore
You should not operate XP Business Copy settings by the Snapshot feature using XP RAID
Manager commands. You should also not operate XP Business Copy set by the Snapshot
feature using XP Command View Advanced Edition Software or XP Remote Web Console.
Operate XP Business Copy using the GUI screen in NAS Backup Restore or the command in
the Snapshot feature.
•
Configuring a cascade connection of XP Continuous Access Journal/XP Business Copy
When configuring a cascade connection of XP Continuous Access Journal/XP Business Copy,
set and perform XP Business Copy and display the status using only XP RAID Manager; not
the Snapshot feature in NAS Backup Restore.
•
Limitations on backup management software functionality
If you resynchronize an XP Continuous Access Journal pair defined by the Remote Copy
function after performing a backup of the S-VOL using backup management software, a full
backup is acquired next time.
Scope of XP Continuous Access Journal functions with NAS Blade 169