Journal groups – HP XP Continuous Access Software User Manual

Page 44

Advertising
background image

NOTE:

If you use LUSE volumes, you must add 1 to the value calculated by the above formula.

Maximum number of pairs that can be created:

Use the following formulas to calculate the maximum number of pairs you can create:

When one pair of extended shared cache memories is used

Maximum number of pairs = ( (11,605 /Number of bitmap areas) )

The ... symbols around a value indicate the value should be rounded down to the nearest
integer.

When two pairs of extended shared cache memories are used

Maximum number of pairs = ( (28,671 /Number of bitmap areas) )

The ... symbols around a value indicate the value should be rounded down to the nearest
integer.

CAUTION:

Bitmap areas used for XP Continuous Access Journal are also used for XP

Continuous Access. If you use XP Continuous Access and XP Continuous Access Journal,
use the total number of both pairs.

NOTE:

If the calculated maximum number of pairs exceeds 16,384, the actual maximum

number of pairs is limited to 16,384.

NOTE:

The capacity of OPEN-V is variable. To calculate the maximum number of pairs

for OPEN-V, use the formula.

Journal groups

XP Continuous Access Journal journal groups have the following requirements:

Each XP Continuous Access Journal pair must be assigned to one and only one journal group.

Table 13 (page 44)

lists journal group specifications.

Table 13 Journal group specifications

Support specifications

Item

Up to 256 journal groups (No. 0 - 255) per array if all
the following conditions are satisfied:

◦ Array is an XP12000 (not an XP10000).

◦ Microprogram version is 50-05-00-00 or later.

◦ Shared memory options #3, #4, and #5 are already

installed.

◦ High Performance mode is applied to shared

memories

1

.

NOTE:

Only the HP service engineer can install shared

memory options and apply High Performance mode. If
necessary, contact your HP account support
representative.

Up to 16 journal groups (No. 0 - 15) per array if any
of these conditions are not satisfied.

Number of journal groups

Up to 4,096

Number of data volumes in a journal group

44

XP Continuous Access Journal operations requirements and restrictions

Advertising
This manual is related to the following products: