HP XP Continuous Access Software User Manual
Page 146
5.
In the list, right-click the pair you want to restore.
The result of this operation differs according to the selected mirror's status.
•
When you select a pair in PSUS or PSUE status, the split pair recovers.
•
When you select a pair in HOLD status, the delta resync operation is performed.
•
When you select a pair in HLDE status, the status changes to HOLD.
6.
Select Pairresync. The Pairresync pane (
) appears.
7.
Select the desired options for the pairs.
8.
Click Set.
9.
In the Preset list on the Pair Operation pane, check the settings you made.
•
To modify a setting, right-click the setting, and select Modify.
•
To cancel a setting, right-click the setting, and select Cancel.
10. Click Apply to restore the pairs.
NOTE:
If an error occurs, the right-most column of the Preset list displays the error code. To
view detailed information about the error, right-click the error code, and select Error Detail.
An error message appears providing detailed information about the error.
11. In the list on the Pair Operations pane, verify that the pairs were successfully restored.
•
If the pair was successfully restored, the pair status is COPY or PAIR.
•
If the delta resync operation was successfully performed, the pair status is COPY or PAIR.
•
If the operation to change pair status was successfully performed, the pair status changes
to HOLD.
12. To monitor the progress of restoring pairs, click Refresh to update the information in the list
or use the Pairdisplay pane (see
Displaying detailed information about journal groups
) to
monitor the detailed status of each pair.
Figure 64 Pairresync pane
•
Range: Restore range. If you select two or more pairs in the same consistency group, the
default is LU. Otherwise, the default is Group. The default setting is Group when the pair status
is HOLD or HLDE. In that case, you cannot change the default setting.
◦
LU: Only the specified pairs are restored.
◦
Group: All pairs in the same consistency groups as the selected pairs are restored.
146
Performing XP Continuous Access Journal pair operations