HP EVA Array iSCSI Connectivity Option - Manual (Page 131)

Figure 67 Add a host for Command View EVA
Presenting a virtual disk to an iSCSI Initiator via HP Command
View EVA
To present a virtual disk to an iSCSI Initiator:
1. Under the Virtual Disks folder select the appropriate Vdisk name.
2. Click the Presentation tab in the VDisk Properties screen.
3. Click the Present tab.
HP Command View lists all host entries for both Fibre Channel hosts and iSCSI hosts.
4. Select the appropriate iSCSI host entry and click Present Vdisk.
Unpresenting a virtual disk to an iSCSI Initiator using HP
Command View EVA
To unpresent a virtual disk to an iSCSI Initiator:
1. Under the Virtual Disks folder select the appropriate Vdisk name.
2. Click the Presentation tab in the VDisk Properties screen.
HP Command View lists the iSCSI host assigned to the VDisk.
3. Select the appropriate iSCSI host and click the Unpresent host(s) button.
NOTE:
If multipathing is active, HP Command View EVA recognizes and automatically unpresents the LUN
from the same iSCSI Initiator on both the mpx100 and mpx100b.
The LUN is unpresented to the iSCSI Initiator when the virtual disk is no longer presented to the
iSCSI Initiator.
EVA iSCSI connectivity user guide 131