HP EVA Array iSCSI Connectivity Option - Manual (Page 164)

Authority None
Syntax
show initiators_LUNmask
Examples The following is an example of the show initiators_LUNmask command:
mpx100 #> show initiators_LUNmask
Index (WWNN/iSCSI Name)
———————-
0 iqn.1991-05.com.microsoft:hp-8qdaqlxt
Please select an Initiator from the list above ('q' to quit): 0
LUN Number WWULN
————————————-
0 50:00:1f:e1:50:01:11:50:00:00:00:00:00:00:00:00
1 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:9a:00:00
2 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:9f:00:00
3 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:a2:00:00
4 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:a5:00:00
5 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:a8:00:00
6 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:ab:00:00
7 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:ae:00:00
8 60:05:08:b4:00:01:1f:60:00:1d:40:00:00:bb:00:00
Show iSNS command
Displays iSNS configuration information for the specified iSCSI port. If the port is not specified, the iSNS
configuration information for both iSCSI ports is displayed.
Authority None
Syntax
show isns [<port num>]
Parameters
port_num
: The iSCSI port number whose iSNS configuration is to be
displayed.
Examples The following is an example of the Show iSNS command:
mpx100 #> show isns
iSNS Information
——————
iSCSI Port 1
iSNS Disabled
IP Address 0.0.0.0
TCP Port No. 3205
iSCSI Port 2
iSNS Disabled
IP Address 0.0.0.0
TCP Port No. 3205
Show LUNs command
Displays LUN information for each target.
164 Command line interface