HP EVA Array iSCSI Connectivity Option - Manual (Page 185)

ID Log message Mes-
sage
Number
Description
74665 #%d: QLReadyTimer: QLiSNSReenable failed 937
The driver timed out while
attempting to reconnect with iSNS.
74784 #%d: QLUpdateInitiatorData: No more room in
Initiator Database
1056
The driver's initiator database
is full. The driver is capable of
storing 1024 iSCSI Initiators in its
database. Use the CLI or GUI to
remove unwanted/unused iSCSI
Initiators.
74800 #%d: QLSetTargetData: No more room in Target
Database
1072
The driver's target database is
full. Use the CLI or GUI to remove
unwanted/unused iSCSI targets.
Fibre Channel driver
The Fibre Channel driver error log messages are listed and described in Table 26 and described in this
section. Log messages beginning with #0 apply to FC port 1 (FC1) and log messages beginning with
#1 apply to FC port 2 (FC2).
Table 26 FC driver—error log messages
ID Log message Message
Number
Description
106583 #%d: QLUtmReceiveIo: Path
invalid/FW No resource count %x
87
The FC processor has received a SCSI
command for an unknown target path
or has run out of resources to execute
additional commands.
106589 #%d: QLIoctlEnable: Adapter disabled 93
The FC processor was disabled by an
IOCTL request to the driver.
106590 #%d: QLIoctlEnable: Initialize FW
error
94
The FC processor firmware failed
initialization. The request to initialize was
received by the driver in an IOCTL request.
106592
#%d: QLIoctlRunDiag: Diagnostic
loopback command failed %x %x %x
%x
96
The FC processor failed the external
loopback test.
106593 #%d: QLIoctlDisable: Re-initialize
adapter failed
97
The FC processor failed to reinitialize in
response to an IOCTL disable request.
106803 #%d: QLIsrEventHandler: Link down
(%x)
307
The FC processor reported a link-down
condition.
106813
#%d: QLIsrEventHandler: Unexpected
async event (%x), MB1=%x, MB2=%x,
MB3=%x, MB4=%x, MB5=%x,
MB6=%x, MB7=%x
317
The FC processor reported an unexpected
asynchronous event. The mailbox registers
provide status, event code, and data related
to the event.
106853 #%d: QLTimer: Link error count (0x%x)
exceeded, link down
357
The driver has determined that the FC link is
unreliable and unusable, due to the number
of errors encountered. The link has been
taken down.
106912 #%d: QLReserveLoopId: out of loop
Ids
416
The FC processor was unable to obtain
the number of loop IDs required. This
failure occurs only when the FC processor
is running multi-ID firmware.
EVA iSCSI connectivity user guide 185