HP EVA Array iSCSI Connectivity Option - Manual (Page 153)

Authority Admin session only
Syntax set
chap
fc [<port_num>]
features
iscsi [<port_num>]
isns [<port_num>]
mgmt
ntp
properties
system
Keywords
fc [<port_num>]
: Sets FC port parameters.
features
: Setsfeatures.
iscsi [<port_num>]
: Sets iSCSI port parameters.
isns [<port_num>]
: Sets iSNS parameters.
mgmt
: Sets management port parameters.
ntp
: Sets NTP parameters.
properties
: Sets properties.
system
: Set system parameters.
Examples The following is an example of the set command:
mpx100 #>set mgmt
Set CHAP command
Configures general mpx100/100b parameters.
Authority Admin session
Syntax
set chap
Example The following is an example of the set chap command:
mpx100 (admin) #> set chap
Index (WWNN,WWPN/iSCSI Name)
—– ———————-
0
iqn.2004-08.com.hp.mpx100.0539A01064.0.2000002037fd8bab.
2200002037fd8bab
1
iqn.2004-08.com.hp.mpx100.0539A01064.1.2000002037fd8bab.
2200002037fd8bab
Please select a presented target from the list above ('q' to quit): 0
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current
value. If you wish to terminate this process before reaching the end of
the list press 'q' or 'Q' and the Enter key to do so.
CHAP (0=Enable, 1=Disable) [Disabled]
All attribute values for port 1 that have been changed will now be saved.
Set FC command
Configures an FC port.
EVA iSCSI connectivity user guide 153