HP EVA Array iSCSI Connectivity Option - Manual (Page 46)

NOTE:
Changes to the management port using the set mgmt command are effective immediately.
Communications may be lost if Telnet was used to log in to the mpx100/100b.
5. Start HP Command View EVA and select the iSCSI Devices folder under the Hardware folder in
the HP StorageWorks Command View EVA window.
6. Click Discover iSCSI Devices ( Figure 11 ). If the iSCSI device is not discovered, click Add iSCSI
Device, enter the mpx100/100b IP address, and then click OK.
Figure 11 Discover iSCSI devices
7. Click iSCSI Controller 1 under Hardware/iSCSI Devices ( Figure 12 ).
46 Installing and upgrading EVA iSCSI connectivity