HP EVA Array iSCSI Connectivity Option - Manual (Page 89)

8. To verify that the LUNs are presented to the VMware host:
a. Rescan for new iSCSI LUNs.
b. In VMware’s VI client, select a server and click the Configuration tab.
c. Choose Storage Adapters in the hardware panel and click Rescan above the Storage Adapters
panel.
The Rescan dialog box displays; see
Figure 41 .
d. Select the Scan for New Storage Devices and the Scan for New VMFS Volumes checkboxes.
e. Click OK.
The LUNs are now available for ESX server.
Figure 41 Rescan dialog box
NOTE:
When presenting iSCSI storage to Virtual Machines you must:
• Create Virtual Machines using LSI Logic emulation.
• Present iSCSI storage to a Virtual Machine either as a data store created on a iSCSI device, or
raw device mapping.
iSCSI Initiator setup for OpenVMS
Beginning with OpenVMS V8.3-1H1, the OpenVMS Software-Based iSCSI Initiator TDK is included as
part of the standard OpenVMS installation. The processes for configuring and enabling the initiator
are detailed in the following sections:
• Configuring TCP/IP services , page 90
• Configuring VLANs , page 90
• Enabling Ethernet jumbo frames , page 90
• Configuring target discovery , page 90
• Starting the iSCSI Initiator , page 92
• Stopping the iSCSI Initiator , page 92
• Setting up storage for OpenVMS , page 92
EVA iSCSI connectivity user guide 89