HP EVA Array iSCSI Connectivity Option - Manual (Page 212)

ii. Enable CHAP and enter a CHAP secret. For example:
CHAPsecret01
2. Enable CHAP for the mpx100/100b iSCSI port:
• To enable CHAP for the mpx100/100b iSCSI port using the HP StorageWorks mpx Manager:
a. Select the appropriate iSCSI port number.
b. Click Advanced Configuration.
c. Select the Enable CHAP check box.
d. Enter a CHAP secret. For example:
hpstorageworks
• To enable CHAP for the mpx100/100b iSCSI port using the mpx100/100b CLI:
a. Enter the set iscsi portnumber command.
b. Select the Presented Target the initiator will log in to.
c. Select the BiDi Discovery CHAP check box.
d. Enter a CHAP secret. For example:
hpstorageworks
3. Enable CHAP on the mpx100/100b iSCSI Presented Target.
a. Click the General tab.
b. Click Secret in the middle of the screen.
c. Click Reset.
d. Enter the mpx100/100b iSCSI Presented Target CHAP secret. For example:
hpstorageworks
e. Click OK.
f. Click Discovery.
• For manually discovering iSCSI target portals:
i. Click Add under Target Portals.
ii. Enter the IP address of the iSCSI port of the mpx100/100b.
iii. Click Advanced.
iv. Select the CHAP Login Information check box.
v. Enter the CHAP secret for the mpx100/100b discovered iSCSI Initiator in the Target
Secret box. For example:
CHAPsecret01
vi. Select the Mutual Authentication check box.
vii. Click OK.
viii. Click OK and the initiator completes target discovery.
• Using iSNS for target discovery:
i. Click Add under iSNS Servers.
ii. Enter the IP address of the iSNS server.
iii. Click OK.
g. Click Targets.
h. Select the appropriate target for login.
i. Click Log On.
j. Click Advanced.
k. Select the CHAP Login Information check box.
l. Enter the CHAP secret for the mpx100/100b discovered iSCSI Initiator in the Target Secret
box. For example:
CHAPsecret01
m. Select the Mutual Authentication check box.
n. Click OK.
o. Click OK and the initiator completes normal login.
212 Setting up authentication