HP EVA Array iSCSI Connectivity Option - Manual (Page 163)

Authority None
Syntax show fc [<port_num>]
Parameters
port_num
: The number of the FC port to be displayed.
Examples The following is an example of the show fc command:
mpx100 #> show fc 1
FC Port Information
———————
FC Port 1
Link Status Down
Current Link Rate Unknown
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:0c:60:11
WWPN 21:00:00:c0:dd:0c:60:11
Port ID 00-00-00
Firmware Revision No. 3.03.07
Frame Size 2048
Execution Throttle 64
Connection Mode Unknown
Programmed Connection Option Loop Preferred
Show Initiators command
Displays SCSI Initiator information for iSCSI and/or FC.
Authority None
Syntax
show initiators
fc
iscsi
Keywords
fc
: Specifies the display of FC initiators.
iscsi
: Specifies the display of iSCSI Initiators.
Examples The following is an example of the show initiators command:
mpx100 #> show initiators
Initiator Information
———————–
Initiator Name iqn.1991-05.com.microsoft:hp-8qdaqlxt
Alias
IP Address 10.3.5.130
Portal No. 1
Status Logged In
OS Type MS Windows
CHAP Disabled
Show Initiators LUN Mask command
Displays initiators and the LUNs that are mapped to them.
EVA iSCSI connectivity user guide 163