HP EVA Array iSCSI Connectivity Option - Manual (Page 183)

ID Log message Mes-
sage
Number
Description
42069 QLFC_HandleTeb: Driver Fatal Error 1109
Event notification: Fibre Channel driver
encountered a fatal error.
42072 QLFC_HandleTeb: FC Logout. 1112 Event notification: FC port logged out.
42242 QLIS_AllocateSessionObject: Out of
session resources.
1282
Failed to allocate object for iSCSI session:
out of session resources.
42252 QLIS_EnqueueiScsiPdu: Duplicate
PDU, CmdSN %d (0x%x), dropping it. 1292
Received iSCSI PDU with duplicate CmdSN
(command sequence number). Command
PDU will be dropped.
42258 QLIS_InstantiateSession: Cannot add
Initiator to the database
1298
Unable to allocate iSCSI Initiator object
while instantiating session.
42404
QLIS_ProcessStartTrb: [%d] CmdSN
%ld is out of range (%ld—%ld), Cdb[0]
0x%02X, DataXferLen 0x%x.
1444
Failed to execute iSCSI command PDU due
to its CmdSN (command sequence number)
being out of range. The log message
provides the incorrect CmdSN, the valid
CmdSN range, the first byte of the CDB, and
the data length.
41234 QLIS_LoginPduContinue: Operation
failed. Initiator 0x%x, TPB status 0x%x 274
iSCSI login failed between receipt of PDU
and request for the data segment.
41238 QLKV_ValidateLoginTransitCsgNsgVer-
sion failed (status 0x%x)
278
iSCSI login failed due to unsupported version
number in received login PDU.
41257 QLIS_LoginPduContinue: Invalid
initiator name. Initiator:
297
iSCSI login PDU contains invalid initiator
name. The format and character set used to
form the initiator name are invalid.
41265 QLIS_LoginPduContinue: Target not
configured for Portal.
305
iSCSI target login was attempted to a portal
(iSCSI1 or iSCSI2) on which the target is not
presented.
41267 QLIS_LoginPduContinue: Target not
found. Target name:
307
iSCSI login PDU received for a target with a
target name unknown to the mpx100/100b.
41268 QLIS_LoginPduContinue: Missing
target name.
308
iSCSI login PDU received without a target
name for a normal session.
41270 QLIS_LoginPduContinue: TSIH is 0 but
InitiatorName key/value not provided.
310
iSCSI login PDU received without an initiator
name key/value.
41272
QLIS_LoginPduContinue:
CONN_STATE_IN_LOGIN, Unknown
InitTaskTag.
312
iSCSI login PDU received with an incorrect
initiator task tag for a session which is
partially logged in. This would occur if a
login PDU other than the initial login PDU
used an initiator task tag that was different
from the initiator task tag provided in the
initial login PDU.
41283 QLIS_LoginPduContinue: TSIH 0x%x
out of range
323
iSCSI login PDU was received with a TSIH
out of range. This would occur if the iSCSI
Initiator attempting the login failed to used
the TSIH value provided in the target login
response PDU (the mpx100/100b is the
target) in subsequent login PDUs.
EVA iSCSI connectivity user guide 183