HP EVA Array iSCSI Connectivity Option - Manual (Page 180)

iSCSI driver
The following log messages are common to both iSCSI ports, 1 (GE1) and 2 (GE2). They are listed in
Table 22 and described in this section. Log messages beginning with #0 apply to iSCSI port 1 (GE1),
and log messages beginning with #1 apply to iSCSI port 2 (GE2).
Table 22 SCSI driver—informational log messages
ID Log message
Message
Number
Description
86347 #%d: QLDisable: Restart RISC 331 Restart iSCSI processor (RISC).
86349 #%d: QLEnable: Restart RISC to update
EEPROM
333
EEPROM updated, restart iSCSI
processor (RISC).
86874 #%d: QLIsrDecodeMailbox: Link up 858
Linkup reported by iSCSI
processor for GE1 or GE2.
Fibre Channel driver
The informational log messages for the Fibre Channel driver are common to both FC ports 1 (FC1) and 2
(FC2). The messages are listed and described in Table 23 . Log messages beginning with #0 apply to FC
port 1 (FC1) and log messages beginning with #1 apply to FC port 2 (FC2).
Table 23 FC driver—informational log messages
ID Log message Message
Number
Description
118882 #%d: QLIoctlDisable: Reset adapter 98
Request to reset the FC processor
(adapter) received from IOCTL
interface.
119088 #%d: QLIsrEventHandler: LIP occurred (%x):
mailbox1 = %x
304
Fibre Channel LIP (loop initialization
procedure) occurred. LIP type is
reported, as are the contents of the
FC processor mailbox 1 register.
119089 #%d: QLIsrEventHandler: LIP reset occurred
(%x): mailbox1 = %x
305
Fibre Channel LIP Reset occurred.
LIP reset type is reported, as are
the contents of the FC processor
mailbox 1 register.
119090 #%d: QLIsrEventHandler: Link up (%x)
mailbox1 = %x
306
Fibre Channel Link Up occurred.
Event status is reported, as are
the contents of the FC processor
mailbox 1 register.
119092 #%d: QLIsrEventHandler: Link mode up (%x):
RunTimeMode=%x
308
Event reporting that the Fibre
Channel link is up, and the mode
it is operating in (point-to-point or
loop). Event status is reported,
as is the RunTimeMode, which
indicates the mode (0 = loop, 1 =
point-to-point).
119093 #%d: QLIsrEventHandler: RSCN update (%x)
rscnInfo: %x
309
Event reporting that an RSCN was
received. Event status is reported,
as is the RSCN information.
119097 #%d: QLIsrEventHandler: Port update (%x)
mb1-3 %x %x %x
313
Event reporting an FC port update.
Event status is reported, as are the
contents of FC processor mailbox 1,
2, and 3 registers.
180 Log data