HP EVA Array iSCSI Connectivity Option - Manual (Page 184)

ID Log message Mes-
sage
Number
Description
41284 QLIS_LoginPduContinue: Session does
not exist, invalid TSIH 0x%x.
324
iSCSI login PDU was received with an
invalid TSIH value. The TSIH is invalid
because there is no session with that TSIH
value. This would occur if the iSCSI Initiator
attempting the login failed to used the TSIH
value provided in the target login response
PDU (the mpx100/100b is the target) in
subsequent login PDUs.
42648 QLIS_HandleTeb: Driver Fatal Error 1688
Event notification: iSCSI driver encountered
a fatal error.
42649 QLIS_HandleTeb: Unload Driver. 1689
Event notification: an IOCTL request was
received to unload the iSCSI driver.
42654 QLIS_HandleTeb: iSNS Connection
Failed
1694
Event notification: an attempt to connect to
the iSNS server failed.
iSCSI driver
The error log messages for iSCSI drier are common to both iSCSI ports. The messages are listed and
described in Table 25 . Log messages beginning with #0 apply to iSCSI port 1 (GE1) and log messages
beginning with #1 apply to iSCSI port 2 (GE2).
Table 25 iSCSI driver—error log messages
ID Log message Mes-
sage
Number
Description
73990 #%d: QLUtmIoctlEnable: Initialize FW failed 262
The iSCSI processor failed
firmware initialization.
74056 #%d: QLRunDiag: MBOX Diag test internal
loopback failed %x %x
328
The iSCSI processor failed the
internal loopback test.
74057 #%d: QLRunDiag: MBOX Diag test external
loopback failed %x %x
329
The iSCSI processor failed the
external loopback test.
74241 #%d: QLiSNSEnableCallback: iSNS Server TCP
Connect failed
513
The iSCSI processor was unable
to connect with iSNS (iSCSI name
server).
74577 #%d: QLIsrDecodeMailbox: NVRAM invalid 849
The iSCSI processor reported
that the iSCSI port NVRAM
(non-volatile memory) contains
invalid data (checksum error).
74587 #%d: QLIsrDecodeMailbox: Link down 859
The iSCSI processor reported a
link-down condition.
74656 #%d: QLReadyTimer: Adapter missed heartbeat
for %d seconds. Time left %d
928
The driver failed to receive a
heartbeat from the iSCSI processor
for the specified number of
seconds.
74661 #%d: QLTimer: Abort pTpb=%p, Type %x,
Timeout 0x%x DrvCount 0x%x, DdbIndex 0x%x
933
The driver timed out an iSCSI
processor operation and is
aborting the operation.
74663 #%d: QLReadyTimer: MBOX_CMD %04x %04x
%04x %04x %04x %04x %04x %04x timed out
935
The driver timed out an iSCSI
processor mailbox command.
184 Log data