Installing and configuring for red hat 5, 35 target login, 36 connected targets tab – HP EVA Array iSCSI Connectivity Option User Manual
Page 77
Advertising
Figure 35 Target login
5.
Click the Connected Targets tab, and then click the Toggle Start-Up button on each target listed
so the targets start automatically (
Figure 36 Connected Targets tab
Installing and configuring for Red Hat 5
To install and configure for Red Hat 5:
NOTE:
The iSCSI driver package is included but is not installed by default. Install the package named
iscsi-initiator-utils-6.2.0.742-0.5.e15 during or after operating system installation.
EVA iSCSI connectivity user guide
77
Advertising